Up
|
MC34063 Adjustable Power Supply DC-DC Converter Lot of 5x This is a lot of 5 pcs adjustable power regulators designed by a famous DC-DC converter IC MC34063. Output is stable and smooth. Totally 3x 470uF/25V electrolytic capacitors, 3x 10uF ceramic capacitors and 1x additional 4.7uH inductor filter to reduce the output ripple. The input can take a range from 4v to 20v DC. The output is adjustable from 2.5V to 20V DC. The lot includes 3x Step-Down mode regulators and 2x Step-Up mode regulators. They are very good for digital panel meter or other device. Input: DC 4V~20V (If you would change the higher endurance voltage electrolytic capacitors. Input voltage range would be DC 4V ~35V) Output Voltage (adjustable): DC 2.5V ~ 20V. ( Step-Down mode is preset to 5V output, Step-Up mode is preset to 12V. Tune the potentiometer to adjust the output voltage.) better than 200mA in Step-Up mode. (Test condition.+20V output, 100 ohm load with a 12V/1A input. ) better than 500mA in Step-Down mode. (Test condition. +5V output, 10 ohm load with a 12V/1A input. ) The output current is up to 1A, may vary by the diffrence of input and output voltage, and the input source's power. Output Ripple: Lower than 50mV or 1% Vout in 200mA load in step down mode and 100mA in step up mode. You can convert the module from step-up mode to step-down mode easily by adjust some components's installation position or convert it from step-down mode to step-up mode. If you need a lower profile, specially for the height, you can use a shorter electrolytic capacitor to replace the original one, but remember the endurance voltage fit your need. If you wanna to install this module into a PCB, you can solder a 3pin 2.54 pitch connector to connect it to the PCB. Please forgive us for not providing the tracking number and checking service to you if you are not in America or Canada. If your total purchasing price is more than $100 or the flat rate mail fee is over $30, we will use TNT express to deliver your package. |