Up
|
Low Power GX1-300 MMX with SVGA/LCD, Ethernet, and audio SBC. The Wafer is designed for limited space applications with only the size of a 3.5" hard drive disk. It supports the full functions of an AT&ATX-compatible industrial computer on a single board. The Wafer-5820 is equipped with a low power consumtion and high performance GX1-300 processor on board. It also contains an SDRAM SODIMM socket that can support up to 512mb memory. The Wafer-5820 provides an ethernet interface, audio interface, socket for DiskOnChip, EIDE interface, one parallel port, one serial port RS-232, one series ports RS-232/422/485 with self-tuner, and a mini-DIN PS/2 keyboard/mouse interface. The built in SVGA/LCD display controller supports both the CRT and LCD display simultaneously. It offers resolutions up to 1280x1024 @ 16 colors. It also provides LVDS interface for long distance LCD panel signal transmission. The display type is configured by software utility. The Flash ROM contains both the system BIOS and the VGA BIOS. The modification, in case of necessary, could be done by reprogramming the Flash ROM. The RS485 has an outstanding characteristic of intelligent directing control which eliminates the extra control signal like RTS. With this feature you can develop your program as you are using a normal RS232 without special control routine. This is especially important in Windows programming which do not allow the program to patch the control pin at your wish. Finally, one PC/104 connector is included for the future application you will need. * NS GX1-300 MMX 32-Bit x86 Processor Supports Intel MMX instruction set extension for the acceleration of multi media applications 16KB unified L1 cache Five-stage pipelined integer unit Integrated Floating Point Unit (FPU) * System Memory: One 144-pin SODIMM socket support up to 512mb SDRAM * BIOS: Award 256KB Flash Memory MediaGx processor has applied the UMA technology which provides 1-4 MB display memory, to be set up by BIOS Support CRT and TFT LCD displays simultaneously Support 18bit TFT LCD panel resolution up to 1024x768 @ 18bpp Support non-interlaced CRT monitors resolutions up to 1280x1024 @ 256 colors or 1024x768 @ 16bpp * Audio: Compliant AC97, support stereo Connector: Speaker, Mic-In, Line-In, Line-Out, CD-In * IDE Interface The IDE support to two PCI Enhanced IDE hard drives * FDD Interface: Support up to two floppy disk drives, 5.25" (360 and 1.2mb) and/or 3.5" (720K, 1.44mb and 2.88mb) * Serial Ports: Two RS232 ports, one RS232 port can be set to RS-422/485 with Self-Tuner technology or can be set to infrared port with transfer rate up to 115 KBPS * Parallel Port: One parallel port, supports SPP/EPP/ECP mode * PS/2 Mouse/Keyboard: A6-pin mini DIN connector is located on the mounting bracket for easyconnection to a keyboard or PS/2 mouse * USB Interface: Two USB ports, USB 1.0 compliant. * Power Management: Supports power saving modes including Normal/Doze/Sleep Modes. APM1.1 compliant. * Watch-Dog Timer: Can be set by 1-255 seconds period. Reset or NMI was generated when CPU did not periodically trigger the timer. * 10/100Mbps Ethernet Controller: Realtek RTL8139 IEEE802.u 100 BASE-TX standard dual auto sensing interface to 10Mbps or 100Mbps networks. On board RJ45 connectors provide for easy connection. * (1) Wafer-5820 All-In-One single board computer. * (1) CD Disk for utility and drivers. * (1) 2.5" IDE Flat Cable (44-pin 2.0mm pitch to 40-pin 2.54mm pitch) * (1) one to two 6pin DIN Connector for keyboard and mouse * (1) combo serial port cable (RS-232/422/485) * (1) standard D25 connector for parallel cable * (1) dual USB connector cable * (1) floppy cable (for 3.5" FDD only) |
