Up
|
VME Bus 4-axis Motion Controller The DMC-1340 for the VME bus is a member of the Legacy Series, a prior generation of general-purpose controllers with a widely installed base. For new applications, Galil recommends the new generation, Optima series DMC-1340 VME controller . The DMC-1340 controller accommodates 4-axis formats and allow control of step or servo motors on any combination of axes. Any mode of motion can be programmed including linear and circular interpolation, contouring, and electronic gearing. Programming the DMC-1340 is simplified with two-letter, intuitive commands. * Accepts up to 8 MHz encoder frequencies for servos and 2 MHz for steppers * Advanced PID compensation with Velocity and Acceleration feedforward * Sample times to 125 microseconds per axis * Modes of motion include jogging, point-to-point positioning, contouring, linear and circular interpolation, and electronic gearing * Multitasking for concurrent execution of up to four application programs * Non-volatile memory for application programs, variables and arrays * Dual encoders, home input and forward and reverse limits accepted for every axis * 8 Uncommitted inputs and 8 outputs for 1- through 4-axes models * 7 Uncomitted analog inputs * Uses Ribbon cables with IDC connectors * Custom hardware and firmware options available Click this link for Data Sheet: http://www.galilmc.com/catalog/catlegacy.pdf Click this link for all other information: http://www.galilmc.com/products/legacy/dmc1300.html The Galil DMC-1340 Card is listed as used. Card is in nice cosmetic condition and appears like new. It has not been tested. No Ribbons or Software included. Comes in original static bag and plastic case. View our 100% Positive Feedback Visit Our Store for more related products like Melles Griot Lenses & more Sony XC Cameras For All Questions 'Email Us' at: Refs_Salvage@yahoo.com Thanks for Stopping in....Have a Great Day! Sell more with Sellercore.com! |